Magigoo Pro PC (Polycarbonate) - 50ml Pen

Magigoo Pro PC is designed to address first layer adhesion to the build platform and print warping with Polycarbonate filaments, making sure prints stick firmly when the print bed is hot and that the part is easy to remove once it cools. This unique and innovative mechanism means that no tools are needed to remove prints from the bed, as they just pop off when the bed cools down. 

The strength and toughness of PC make it an ideal FFF material for the production of functional prototypes as well as end use parts, but printing with it does present some challenges. Virgin PC has a high glass transition temperature (Tg) and thus can be used in high temperature applications. However, having a high Tg can make it very difficult to print using desktop printers, as these are usually not equipped as well for the high printing temperatures required to print virgin PC. Virgin PC tends to warp considerably when using an insufficient bed temperature (<130 ºC), or when printed in non-heated enclosed chambers without the use of an appropriate bed adhesive.

Magigoo Pro PC can be used on glass or a multitude of other surfaces. Use on other plastic-based surfaces, including sheets, is recommended to provide strong adhesion and preventing the part from fusing to the sheet.

• Over 100 applications per pen
• Works with PC (Polycarbonate) build materials
• Easy application
• Easy release
• Easy clean
• No smell
• Non-toxic
• No additional tools needed
• Easy to transport